News
News

Explorer of innovative chemical new materials for industrial application

What is the specific usage method of crosslinking agent?

time:2020-10-26
share:

What is the specific usage method of crosslinking agent? The usage method of this product is actually very simple. Firstly, it is necessary to clarify whether this system or a certain material is suitable for use. This curing component can be suitable for a wide range of materials, whether they contain ions or not. Therefore, in terms of applicability, people generally do not need to consider too many issues. In addition to considering practicality, other aspects also need to be taken into account when using this product. Below is a brief introduction to its usage method.

交联剂具体的使用方法是什么?


When using crosslinking agents, the second issue to consider is the acidity or alkalinity. Generally speaking, this type of product should be added to a product with an acidity or alkalinity between 6 and 9. Adding and mixing it into such a material will produce better results. If it is in other acidity or alkalinity areas, it needs to be tested first. If the test results are good, it can be used. If the test results are not good, do not use it rashly. The third thing to pay attention to when using this product is to check the equivalent amount of active groups in the materials to be added, and then mix them in a ratio of 1:1.8 to achieve better results. The fourth thing to pay attention to is the use in other systems. Generally speaking, in some other typical systems, the proportion of additives used is between 1% and 3%. But some materials may be more special, so they can be adjusted to 3% to 10% in the formula. Sometimes the proportion can also be determined based on one's own testing, because for example, weather conditions can affect the curing speed. Therefore, when the weather is hot, it is necessary to add less inside, and when the weather is cold, it is appropriate to add more inside. When using, other issues should be noted, such as keeping this product away from children to avoid accidental ingestion. At the same time, attention should be paid to ventilation during use, and care should be taken not to touch the eyes. This product should be kept away from high temperature environments during use.


The question of how to use crosslinking agents is roughly introduced here. This product itself is very simple to use, and after use, it can make the original material have better resistance to friction and corrosion, while also improving the ability of other materials to withstand washing.

More information