Organic silicon defoamer for foaming electroplating wastewater

As the saying goes, 'A person relies on clothing, and a Buddha relies on gold.' Beautiful appearances always add a lot of colors, and even metal surfaces must be 'decorated'. Therefore, more and more electroplating factories have emerged. With the increase of electroplating factories, environmental pollution, especially water pollution, will inevitably increase. Therefore, enterprises should do a good job in sewage treatment and should not directly discharge unqualified electroplating wastewater into rivers.

In fact, the management of sewage treatment process is not only simple, especially the foam problem is also very troublesome, but fortunately, silicone defoamer can make environmental purification easier by eliminating foam in time.

There are two kinds of chemical and biological foam foam in the treatment of large electroplating wastewater:

Chemical research foam: when the sewage system contains detergent, colloidal organic matter and other surfactants or other economic foam and substances, under the conditions of water flow velocity, fall, aeration and blow off, a large number of small, light white brown unstable foam may appear on the water surface.

Biological foam: Biological foam usually does not contain brown or grayish brown. There are many reasons for this foam, such as brown foam caused by too low dissolved gas in the biochemical tank, beige foam caused by too low MLSS, or foam caused by microbial factors such as abnormal microorganisms.