Chemical Technology-Jianyi Chemical Raw Materials Official Website_Page:8

Established in

86-189-2243-9442 86-20-6667-1949

News

News

Explorer of innovative chemical new materials for industrial application

Chemical hotspots

Jianyi News

Jianyi Notice

Chemical Technology

Chemical Q&A

Brand dynamics

home/News/Chemical Technology

Chemical hotspots

Jianyi News

Jianyi Notice

Chemical Technology

Chemical Q&A

Brand dynamics

2020-10 30

The treatment method of rubber carpet back release agent
Release agent is mixed with alkaline water and will turn white on the back of the carpet. At that time, white vinegar and ink were mixed and wiped clean, but it reappeared after two days. This was mainly due to the poor compatibility between alkali and rubber, and the alkaline substances kept leaki

More →
2020-10 30

Characteristics and morphological classification of silicon free release agents
As a product, the characteristics of silicon free release agents are as follows:1. The surface tension is low and easy to disperse, forming a thin oil film on all surfaces of the mold. It can also be used in molds with complex structures.2. Poor affinity with organic polymer materials, non adhesive,

More →
2020-10 30

What are the characteristics of organic silicon release agents
Release agent is an additive used to alleviate the frictional resistance generated during the demolding process of rubber and plastic products, which can form an effective isolation film. Silicone release agent is one of the best, so what are the characteristics of silicone release agent?1. Co

More →
2020-10 30

Correct use of release agent
Release agent is used in injection molding. When making plastic, various molds are needed to shape the shape of the plastic. However, when using molds, the vacuum forming material is attached to the mold. What if they are separated? We need to use release agent here.Release agents can exert a detach

More →
2020-10 30

Introduction to Rubber Release Agent Knowledge
It is understood that rubber release agents are generally divided into two types: external use and internal use. Traditional mold release agents are generally applied externally, that is, coated on the surface of the mold cavity. They are also commonly referred to as isolation agents. The products m

More →
2020-10 30

Release agent for zinc alloy die-casting
Zinc alloy die-casting parts are generally produced using hot chamber die-casting machines. In the entire process of metal die-casting and casting, the role of release agents mainly includes the following three aspects:1. Before the metal hydraulic injection, it is evenly distributed on the surface

More →
2020-10 30

Application and Chemical Principles of Die Casting Release Agents
Water based release agents should generally be preferred for die-casting release agents because they have the characteristics of low cost, easy volatility, and can not only play a role in demolding, but also regulate the mold temperature during demolding, and are easy to prepare.When usi

More →
2020-10 30

Tips for using die-casting release agent
Release agent, also known as mold release agent, is a solvent used to lubricate molds during alloy casting and plastic product molding, causing the workpiece and mold to detach. However, its performance is affected by the mold temperature, so there is often a blind spot in selecting a suitable mold

More →

«pre ···6 7 8 9 10··· next»