Five tips for identifying genuine and fake environmentally friendly crosslinking agents

Nowadays, it is a society that emphasizes environmental protection and conservation. Compared with traditional paints, water-based crosslinking agents are one of the environmentally friendly products. They do not pollute the environment and are a typical example of guiding consumption to achieve energy conservation and emission reduction. Therefore, in recent years, water-based crosslinking agents have received increasing attention as a low pollution green and environmentally friendly product, and will become the protagonist of the future world environmental protection market.

Today, the editor of Jianyi Chemical will talk about several methods on how to distinguish between genuine and fake environmentally friendly crosslinking agents.

Firstly, when purchasing crosslinking agents, it is advisable to choose legitimate sales channels and well-known products. True green products must bear the "Ten Rings" logo issued by the China Environmental Labeling Product Certification Committee.

How much does phenolic resin crosslinking agent cost

Second point: Look at the surface of the product. High quality crosslinking agents have a colorless and clear protective adhesive solution layer. There are usually no floating objects on the surface.

Thirdly, smell the product for any pungent odor. Toxic products may not necessarily have an odor, but those with an odor are definitely toxic. If there is severe delamination of the crosslinking agent, it indicates poor quality. If there is no problem with the manufacturer, they usually use the method of opening the lid for sale to let consumers see the environmental friendliness of the product.

Fourth point: Carefully review the quality inspection report of the product, especially paying attention to its total organic volatile matter. Organic volatile compounds pose great harm to both our living environment and ourselves. We should try to minimize the amount of these solvents used.

Fifth point: Inquire about the solvent situation, responsible brands will limit the use of toxic solvents. Generally speaking, after the product is dried, its solvent can basically evaporate, but this requires a process, especially for solvents that solidify at room temperature.