How to use environmentally friendly water-based release agent?

Many people know that water-based release agents are environmentally friendly release agents advocated by the country, but how to use water-based release agents? I believe many of you are not very familiar with it. The editor of Jianyi Chemical thinks it is necessary to popularize the usage of environmentally friendly water-based release agents here, and understand the dilution ratio and dilution solvent of release agents?

Usage of water-based release agent:

1. First, thoroughly clean the mold with a mold cleaner to remove any remaining mold release agent scale and other contaminants. Then, use a clean cloth to absorb any moisture from the mold;

2. Shake the water-based release agent before use. If there is sediment, shake well without affecting the release effect;

3. Use a brush or cotton cloth to wipe, or use air assisted spraying equipment;

4. On the pre cleaned mold, wipe the release agent once on the mold, and the release agent will cover the mold to form a strong and transparent film;

5. After the release agent has completely evaporated and dried, the mold can be painted or directly canned;

As for the dilution ratio of the release agent, it depends on the complexity of the product, the density of the solvent used, and the actual situation. The general dilution of concentrated solution ranges from 10 to 20 times, but the editor reminds users that it is recommended to use the corresponding solvent of the release agent for better dilution effect! For any new use or change in process, feasibility experiments need to be conducted first in order to achieve the best dilution ratio and maximize the product effect.